|
|
Post by Dodgeboy426 on Nov 8, 2005 22:56:24 GMT -8
Does anyone know of a MPFI vehicle that uses an external fuel pump? The one in the jeep is going but I'd rather put one on the frame rail than that stupid in tank model they use  |
|
bigblockcowboy
Weekend Warrior
Corporal post-whore
The devil made me do it! TWICE!!!
Posts: 197
|
Post by bigblockcowboy on Nov 8, 2005 23:56:28 GMT -8
Not sure, maybe the older turbo Caravans? If not, it shouldn't be too hard to conver it, but you might need a gas tank out of a carbureted vehicle.
|
|
|
|
Post by Dodgeboy426 on Nov 9, 2005 7:09:55 GMT -8
Nope I'll just draw thought the old housing and keep the stock gas gage sender. just need to find a high pressure external type pump  |
|
bigblockcowboy
Weekend Warrior
Corporal post-whore
The devil made me do it! TWICE!!!
Posts: 197
|
Post by bigblockcowboy on Nov 10, 2005 0:06:00 GMT -8
Yeah that'll work. Do you have a Canadian High performance discount outlet near you? They or any other performance parts place should be able to hook you up. Just remember that you still need a pressure regulator so the pump won't run continuously and burn out.
|
|
|
|
Post by Dodgeboy426 on Nov 10, 2005 5:21:07 GMT -8
yeah, I'd just tie into the stock wiring to the pump so as to utilize the stock regulator.
|
|
bigblockcowboy
Weekend Warrior
Corporal post-whore
The devil made me do it! TWICE!!!
Posts: 197
|
Post by bigblockcowboy on Nov 10, 2005 6:41:58 GMT -8
Cool. I had to do this to my buddies F-150, only it was a little more complicated because for some reason I couldn't trace any of the wiring and had to run all new wires with a different regulator ( big pain in the ass typical used Ford)
|
|
